FUJIFILM® ELUXEO® 7000 and EndoManager® EMS
FUJIFILM® ELUXEO® 7000 connects to EndoManager® EMS by DICOM, straight over the network. No capture PC is needed in the room. It sends stills only.
| Models | VP-7000 processor + BL-7000 light source |
|---|---|
| Path | DICOM direct to EMS |
| Connection | Network DICOM (MWL + C-Store); stills only. The DICOM Modality Worklist brings in the patient name, and EMS reads the scope serial from each stored DICOM image. |
| Capture station (EM4) needed | No |
What's supported
- Still images
- DICOM Modality Worklist
- DICOM C-Store
- Patient details sent to the device
- Scope serial detection
What's not supported on this path
- Video is not sent on this path.
- Capture is not triggered from the scope on this path.
Other ways to connect
- This platform can also connect through an EM4 capture client. Compare
Where images go
Images captured from this device go to EndoManager EMS, which can forward them to your EHR, a PACS or VNA, or both.
EndoManager EMS connects to EHRs by HL7. For Epic organizations, EMS sends images to the Lumens procedure note and, where used, to Epic Gallery. The listing "EndoManager EMS by NewCura" has Epic Toolbox status in Endoscope Data Capture; Epic does not endorse, certify, or verify listed software. EMS also connects to Oracle Health (Cerner), MEDITECH and other HL7-capable EHRs.