Scope tracking and reprocessing
Endoscope Tracking A Complete Guide to Following Every Scope, Every Step
Last reviewed
Endoscope tracking means keeping a record of where each flexible endoscope is and what has happened to it, from the storage cabinet to the procedure room, through cleaning, high-level disinfection or sterilization, drying, and back to storage. A good tracking record shows which scope was used on which procedure, who cleaned and reprocessed it, when each step happened, and its repair and loaner history. Professional guidance on endoscope processing, including AAMI ST91 and CDC's reprocessing program guidance, expects facilities to keep this kind of documentation.
This guide covers why tracking matters, what to record at each step, what public guidance says, and how to move from paper logs to software.
Why endoscope tracking matters
Flexible endoscopes are complex, reusable devices with long, narrow channels. They're used on one patient, reprocessed, and used on the next. Because of that, facilities need to be able to answer a few questions quickly and with confidence:
- Where is this scope right now, and is it ready to use?
- Was every step of reprocessing done, by a trained person, in the right order?
- Which patients' procedures used this scope? This matters if a scope later fails a check or a manufacturer issues a notice and the facility needs to look back.
- When was it last repaired, and is it a loaner?
The U.S. Food and Drug Administration has publicly discussed the challenges of reprocessing complex endoscopes such as duodenoscopes and the importance of following manufacturers' instructions (FDA, Infections Associated with Reprocessed Duodenoscopes (opens in a new tab)). Tracking doesn't clean a scope. It's how a facility shows, and checks, that cleaning happened as it should.
What public guidance covers
Several public sources shape how U.S. facilities handle endoscope processing and records:
- *AAMI ST91, Flexible and semi-rigid endoscope processing in health care facilities.* The Association for the Advancement of Medical Instrumentation's national standard covering processing from point of use through storage, including documentation and traceability (AAMI (opens in a new tab)).
- *CDC, Essential Elements of a Reprocessing Program for Flexible Endoscopes.* Recommendations from the Healthcare Infection Control Practices Advisory Committee (HICPAC) on building a reprocessing program, including training, competency, and documentation (CDC (opens in a new tab)).
- *SGNA, Standards of Infection Prevention in the Gastroenterology Setting.* The Society of Gastroenterology Nurses and Associates' standards for endoscope reprocessing (SGNA (opens in a new tab)).
- Multi-society guideline on reprocessing flexible GI endoscopes. Published by gastroenterology and infection-prevention societies, including ASGE (ASGE (opens in a new tab)).
- The manufacturer's instructions for use (IFU). Every model has its own IFU, and guidance consistently points back to it.
Your infection prevention team decides how these apply to your facility. Software should support your policy, not replace it.
What to record at each step
A practical tracking record follows the scope's loop. Here is what most programs capture:
| Step | What to record |
|---|---|
| Storage | Scope ID, when it was placed in and removed from storage, and where it went |
| Procedure room | Which procedure and room it was used for, date and time, and who used it |
| Point-of-use pre-cleaning | That bedside pre-cleaning was done, by whom, and when |
| Transport | Movement from the room to reprocessing |
| Leak testing and manual cleaning | Each step, result and staff member |
| High-level disinfection or sterilization | The cycle, equipment used, result, staff member and time |
| Drying | Drying step and time |
| Return to storage | When it went back, closing the loop |
| Repairs and loaners | Repair dates and reasons, loaner scopes in and out |
| Staff competency | Who is trained and current on each step and scope type |
The key ideas are a unique ID for every scope, a name and time on every step, and a record that's easy to pull for one scope or one patient.
Paper logs vs tracking software
Paper logs are still common, and they can work. But they have limits:
- Entries get skipped, smudged or filled in later.
- Answering "which patients used this scope?" can mean hours of searching binders.
- Spotting trends, such as one scope going to repair again and again, is hard.
- Competency records live in a different binder than reprocessing records.
Tracking software turns each step into a guided, time-stamped entry, keeps every scope's history in one place, and lets you pull a report in minutes instead of hours.
Best practices for an endoscope tracking program
- Give every scope a unique ID and use it at every step.
- Record each step when it happens, not at the end of the shift.
- Tie scopes to procedures, so a lookback by scope or by patient is quick.
- Build workflows from the IFU and your policy, model by model.
- Track competency next to the work it covers.
- Track repairs and loaners, not just routine reprocessing.
- Review the records regularly, and use what you find for training and process fixes.
How ScopeCycle® supports endoscope tracking
ScopeCycle® is NewCura's cloud software for endoscope tracking and reprocessing documentation. It follows each scope from the storage cabinet to the procedure room, through decontamination, reprocessing and drying, and back to storage, and records who did each step and when.
- Guided workflows configured to your facility's policies and the manufacturer's instructions
- Scope history in minutes, including patient-use history, reprocessing records and transport times
- Reports on reprocessing history, utilization, inventory, loaners, repairs and staff competency
- Task management for daily, weekly and monthly work such as preventive maintenance
- Staff competency records kept with the work
- Cloud hosted, so there are no servers to install
ScopeCycle® assists with compliance with SGNA, CDC and multi-society guidelines by guiding each step and keeping the record. It works on its own, and it connects to EndoManager® EMS so exam and scope data from the procedure room can flow in automatically.
About NewCura
NewCura has built endoscopy software since 1999 and supports more than 500 facilities, with a global presence. Call 866.578.5713. Real people answer 24/7/365.
Frequently asked questions
What is endoscope tracking?
It's keeping a record of each endoscope's location and history: which procedures it was used for, every reprocessing step, who did it and when, plus repairs and loaners.
Is endoscope tracking required?
Public guidance such as AAMI ST91 and CDC's reprocessing program recommendations expect facilities to document endoscope processing. How that applies to you depends on your facility's policies, accreditor and state rules. Ask your infection prevention team.
What is AAMI ST91?
It's AAMI's national standard for flexible and semi-rigid endoscope processing in health care facilities, from point of use through storage.
Can we track endoscopes on paper?
Yes, many facilities do. Software makes entries harder to skip and records much faster to search.
What should an endoscope tracking record include?
A unique scope ID, every step from storage through reprocessing and back, the staff member and time for each, the procedure it was used for, and repair, loaner and competency records.
Does ScopeCycle® work without EndoManager?
Yes. ScopeCycle® works on its own, and it connects to EndoManager EMS for automatic exam and scope data.
Related: ScopeCycle® · The dangers of poor reprocessing instructions · EndoManager · Pricing and demo
EndoManager® and ScopeCycle® are registered trademarks of Summit Imaging, Inc. d/b/a NewCura. AAMI is a trademark of the Association for the Advancement of Medical Instrumentation. Other names are the property of their owners.